Home >

News

13Mar 2021

The Development Prospects Of Injection Molding Machines

There are many manufacturers of injection molding machines in China, and according to incomplete statistics, there are more than 3,000. The structure of the injection molding machine has two types:...
12Mar 2021

Repair And Maintenance Of Injection Molding Machine

Check whether the mold in operation is in a normal state: whether there is low-pressure mold clamping protection;
11Mar 2021

Points For Purchasing Injection Molding Machines

Injection molding machine is a common plastic machinery. For operators who use and purchase injection molding machines, they should first understand the performance of a good injection molding mach...
10Mar 2021

The Operation Process Of The Injection Molding Machine

Do not arbitrarily cancel the function of the safety door for convenience.
09Mar 2021

Operation Points Of Injection Molding Machine

Before operating the injection molding machine, check whether there is water or oil in the electrical control box. If the electrical appliance is damp, do not turn it on. There should be maintenanc...
08Mar 2021

Performance Of Injection Molding Machine

1. Use excellent performance servo controller, servo motor and other energy-saving devices.
2. Sensitive servo control system, quick start response time only needs 0.04S.
07Mar 2021

Industry Development Of Injection Molding Machine

The manipulator of the injection molding machine is an automated production equipment that can imitate part of the functions of the upper limbs of the human body and can automatically control it to...
06Mar 2021

Classification And Use Of Injection Molding Machines

The injection molding machine has the ability to mold plastic products with complex appearance, precise size, or dense texture with metal inserts at one time. It is widely used in national defense,...
05Mar 2021

Features Of Injection Molding Machine

The injection device and the clamping device are on the same vertical centerline, and the mold is opened and closed in the up and down direction. Its floor space is only about half of that of a hor...
04Mar 2021

The Molding Process Of The Injection Molding Machine

First, add granular or powdered plastic into the barrel, and turn the screw and heat the outer wall of the barrel to make the plastic into a molten state,
03Mar 2021

Working Principle Of Injection Molding Machine

The working principle of the injection molding machine is similar to the syringe used for injection. It uses the thrust of the screw (or plunger) to inject the plasticized plastic in the molten sta...
02Mar 2021

Injection System Of Injection Molding Machine

The injection system is one of the most important components of the injection molding machine. Generally, there are three main types: plunger type, screw type, and screw pre-plasticized plunger inj...

First 1 2 3 4 567 Last 6/7

News

The Development Prospects Of Injection Molding Machines

Repair And Maintenance Of Injection Molding Machine

Points For Purchasing Injection Molding Machines

The Operation Process Of The Injection Molding Machine

Operation Points Of Injection Molding Machine

Performance Of Injection Molding Machine

Industry Development Of Injection Molding Machine

Classification And Use Of Injection Molding Machines

Features Of Injection Molding Machine

The Molding Process Of The Injection Molding Machine

Working Principle Of Injection Molding Machine

Injection System Of Injection Molding Machine