This is a 20 litre bucket mould with lid and carry handle. It can also be used as a waste bin. We have continued to satisfy our customers and as a result, over the past three years, they have continued to place orders with us for a variety of everyday items such as cup moulds, spoon moulds, wash basins, small bath tubs, food lunch boxes etc. This customer from Zimbabwe bought three Shenzhou—— 4800A injection moulding machines from us, and because quality of our ShenZhou that we have won the trust of our customers.
项目 ITEM | 单位UNIT | SZ—3000A | |||
INJECTION UNIT | |||||
螺杆直径 | SCREW DIAMETER | mm | 60 | 65 | 70 |
螺杆长径比 | SCREW LID RATIO | L/D | 22.7 | 21 | 19.5 |
理论注射容积 | THEORETICAL SHOT VOLUME | CM3 | 848 | 995 | 1154 |
注射质量(PS料) | SHOT WEIGHT(PS) | g | 772 | 905 | 1050 |
注射压力 | INJECTION PRESSURE | Mpa | 207 | 176 | 152 |
理论注射速率(PS料) | THEORETICAL INJECTION RATE(PS) | g/s | 241 | 283 | 328 |
塑化能力(PS料) | PLASTICISING CAPACITY | g/s | 35.2 | 43.3 | 51.8 |
螺杆驱动扭矩 | SCREW TORQUE | N.m | 2530 | ||
螺杆最高转速 | MAX.SCREW ROTATE SPEED | r/min | 150 | ||
洼射行程 | INJECTION STROKE | mm | 300 | ||
CLAMPING UNIT | |||||
合模力 | MAX.CLAMPING FORCE K | KN | 3000 | ||
移模行程 | MAX.OPENING STROKE | mm | 590 | ||
拉杆有效间距(VxH) | SPACE BETWEEN TIE BARS | mm | 610×610 | ||
允许模厚(MIN-MAX) | MOULD HEIGHT | mm | 220-630 | ||
模板最大开距 | MAX.DAYLIGHT | mm | 1220 | ||
液压顶出力 | EJECTOR FORCE | KN | 70.6 | ||
液压顶出行程 | EJECTOR STROKE | mm | 150 | ||
液压顶出杆总数 | EJECTOR QUANTITY | 9 | |||
油泵电动机功率 | PUMP MOTOR POWER | KW | 30 | ||
油泵最高压力 | PUMP PRESSURE | Mpa | 16 | ||
料简加热功率 | HEATING POWER | KW | 22 | ||
加热区段 | HEATING ZONE | 5 | |||
机器外形(LxWxH) | SIZE | m | 6.7×1.75×2.25 | ||
机器净重 | NET WEIGHT | t | 11 | ||
油箱容积 | OIL TANK CAPACITY | L | 560 | ||
国际公认型号 | INTERNATIONAL DESIGNATION | 3000—1750 | |||
We provide free accessories to keep the machine running without any problems
| After-sales service |
| Engineer onsite service |
We have been to Zimbabwe for commissioning and the customer has largely mastered the commissioning skills and is able to operate the production himself.
| Buyer evaluation |
We are 20 years manufacturer of the injection molding machine in China, more than 1500 customers all over the world.
Clothes hanger mould
Bucket moulds
Samples
If you want to produce plastic products or product moulds, or injection moulding machines please contact us.
This is our email : nancy@shenzhoumac.com
Hot Tags: plastic bucket 20 liter injection molding machine, China plastic bucket 20 liter injection molding machine manufacturers, suppliers, factory, Custom Cap Bottle Machine, injection moulding machine small, injection molding weight, double shot injection molding machine, bakelite injection moulding machine, acrylic moulding machine
