1. In the small batch trial production or trial mold, the mold structure is simple and low cost, and it is easy to disassemble and replace different molds. It is easy to insert molding. Because the mold surface faces upwards, the inserts are easy to place and position, and the weight of the mold is supported by the horizontal template. The upward and downward opening and closing actions will not occur the phenomenon that the template cannot be opened and closed due to the gravity of the mold similar to the horizontal machine, which is conducive to maintaining the accuracy of the machine and the mold.
2. The characteristics of the sliding plate machine: the upper template is fixed and the lower template can be moved by sliding. If the belt conveyor device is combined with the manipulator, fully automatic insert molding can be easily realized.
3. Features of the disc machine: the mold can be rotated 360 degrees, and it can be injection molded with one upper mold or two molds. It is equipped with a rotating table, a moving table, and an inclined table. It is easy to realize insert molding and in-mold combination molding. With automatic operation, each plastic part cavity can be taken out and formed by a simple manipulator.
