When the vertical machine is produced, due to the movement of the machine, the hydraulic oil inside the vertical injection molding machine rubs against each other to generate heat, which causes the oil temperature to rise. During production, check the oil temperature. The normal oil temperature is about 45°C. In the production process of the vertical injection molding machine, the oil temperature is too high or too low will affect the pressure transmission.
The second is the material temperature: the barrel temperature. This temperature is determined by the materials used in the product and the requirements of the product. During production, it must be adjusted according to the actual requirements and cannot exceed the required temperature in the relevant documents. At the same time, materials and cycles must be considered. The last is the mold temperature. The temperature of the vertical injection molding machine mold is also an important parameter. Its height has a great influence on the performance of the product, so the product must be considered when setting it.
